Preparation before starting the machine is crucial. Check whether the appearance of the equipment is damaged and whether all parts are normal. At the same time, ensure that the lubrication system, cooling system and electrical system of the roller press are operating normally. In addition, prepare the materials to be processed and check whether the quality and size of the materials meet the requirements. This step is the basis for ensuring the normal operation of the equipment.
First turn on the power switch and start the motor. Observe the operation of the motor to ensure that the motor is operating normally. After the motor runs stably, start the drive device of the roller press. At this time, pay attention to the operating status of the equipment and check whether the various parts of the roller press are operating normally.
Adjust the parameters of the roller press. According to the characteristics of the material and processing requirements, adjust the pressure, speed and other parameters of the roller press. When adjusting the parameters, pay attention to the safety performance of the equipment. For example, excessive pressure may cause damage to the equipment, and too fast speed may affect the processing quality of the material.
Start feeding. Feed the material evenly into the feed port of the roller press. During the feeding process, pay attention to the distribution of the material to avoid uneven accumulation of the material. At the same time, pay close attention to the operating status of the equipment to ensure that the material enters the roller press smoothly.
Perform roller pressing operation. After the material enters the roller press, the roller press begins to squeeze and crush the material. During the operation, pay attention to the changes in the pressure and speed of the equipment. At the same time, observe the processing of the material to ensure that the material achieves the expected processing effect.
After the material is roller pressed, it is discharged from the discharge port. During the discharge process, pay attention to the discharge of the material to avoid the material blocking the discharge port. At the same time, clean up the material around the discharge port in time to keep the equipment clean.
After completing the roller pressing operation, turn off the drive device and motor of the roller press. Then turn off the power switch. After the shutdown, check and maintain the equipment to prepare for the next operation. At the same time, pay attention to the safety performance of the equipment to avoid accidents.
